This command enables the DHCPv4 client on a Service port. If the client-id optional parameter is given, the DHCP (Dynamic Host Configuration Protocol) client messages are sent with the client identifier option.
Default | none |
Format | serviceport protocol dhcp [client-id] |
Mode | Privileged EXEC |
There is no support for the no form of the command serviceport protocol dhcp client-id. To remove the client-id option from the DHCP client messages, issue the command serviceport protocol dhcp without the client-id option. The command serviceport protocol none can be used to disable the DHCP client and client-id option on the interface.
The following shows an example of the command.
(Extreme 220) (Routing) # serviceport protocol dhcp client-id