Use this command to enable the DHCP (Dynamic Host Configuration Protocol) L2 Relay agent for a set of VLANs. All DHCP packets which arrive on interfaces in the configured VLAN are subject to L2 Relay processing.
| Default | Disabled |
| Format | dhcp l2relay vlan vlan-list |
| Mode | Global Config |
| Parameter | Description |
|---|---|
| vlan–list | The VLAN ID. The range is 1–4093. Separate nonconsecutive IDs with a comma (,) no spaces and no zeros in between the range. Use a dash (–) for the range. |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB