ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Port-Channel/LAG (802.3ad) Commands > lacp partner system id > no lacp partner system id

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no lacp partner system id

Use this command to configure the default value representing the administrative value of the Aggregation Port‘s protocol Partner‘s System ID.

Format	no lacp partner system id
Mode	Interface Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback