This command displays ISDP statistics.
Format | show isdp traffic |
Mode | Privileged EXEC |
ISDP Packets Received | Total number of ISDP packets received |
ISDP Packets Transmitted | Total number of ISDP packets transmitted |
ISDPv1 Packets Received | Total number of ISDPv1 packets received |
ISDPv1 Packets Transmitted | Total number of ISDPv1 packets transmitted |
ISDPv2 Packets Received | Total number of ISDPv2 packets received |
ISDPv2 Packets Transmitted | Total number of ISDPv2 packets transmitted |
ISDP Bad Header | Number of packets received with a bad header |
ISDP Checksum Error | Number of packets received with a checksum error |
ISDP Transmission Failure | Number of packets which failed to transmit |
ISDP Invalid Format | Number of invalid packets received |
ISDP Table Full | Number of times a neighbor entry was not added to the table due to a full database |
ISDP IP Address Table Full | Displays the number of times a neighbor entry was added to the table without an IP address. |
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show isdp traffic
ISDP Packets Received.......................... 4253
ISDP Packets Transmitted....................... 127
ISDPv1 Packets Received........................ 0
ISDPv1 Packets Transmitted..................... 0
ISDPv2 Packets Received........................ 4253
ISDPv2 Packets Transmitted..................... 4351
ISDP Bad Header................................ 0
ISDP Checksum Error............................ 0
ISDP Transmission Failure...................... 0
ISDP Invalid Format............................ 0
ISDP Table Full................................ 392
ISDP IP Address Table Full..................... 737