show interface lag

Use this command to display configuration information about the specified LAG (Link Aggregation Group) interface.

Format show interface lag lag-intf-num
Mode Privileged EXEC
Column
Meaning
Packets Received Without Error The total number of packets (including broadcast packets and multicast packets) received on the LAG interface
Packets Received With Error The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Broadcast Packets Received The total number of packets received that were directed to the broadcast address. Note that this does not include multicast packets.
Receive Packets Discarded The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
Packets Transmitted Without Error The total number of packets transmitted out of the LAG.
Transmit Packets Discarded The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. A possible reason for discarding a packet could be to free up buffer space.
Transmit Packets Errors The number of outbound packets that could not be transmitted because of errors.
Collisions Frames The best estimate of the total number of collisions on this Ethernet segment.
Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and seconds since the statistics for this LAG were last cleared.