show serviceport ipv6 neighbors

Use this command to displays information about the IPv6 neighbor entries cached on the service port. The information is updated to show the type of the entry.

Default None
Format show serviceport ipv6 neighbors
Mode Privileged EXEC
Column
Meaning
IPv6 Address The IPv6 address of the neighbor.
MAC Address The MAC Address of the neighbor.
isRtr Shows if the neighbor is a router. If TRUE, the neighbor is a router; FALSE it is not a router
Neighbor State The state of the neighbor cache entry. Possible values are: Incomplete, Reachable, Stale, Delay, Probe, and Unknown
Age The time in seconds that has elapsed since an entry was added to the cache.
Last Updated The time in seconds that has elapsed since an entry was added to the cache.
Type The type of neighbor entry. The type is Static if the entry is manually configured and Dynamic if dynamically resolved.

The following is an example of the command.

(Extreme 220) (Routing) #show serviceport ipv6 neighbors
                                                                Neighbor  Age
IPv6 Address                            MAC Address       isRtr State    (Secs)   Type
--------------------------------------- ----------------- ----- --------- ------  --------
FE80::5E26:AFF:FEBD:852C                5c:26:0a:bd:85:2c FALSE Reachable 0       Dynamic