Use this command to specify authentication methods for HTTPS server users. The default configuration is the local user database is checked. This action has the same effect as the command ip https authentication local. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specifynone as the final method in the command line. For example, if none is specified as an authentication method after radius, no authentication is used if the RADIUS (Remote Authentication Dial In User Service) server is down.
| Default | local |
| Format | ip https authentication method1 [method2...] |
| Mode | Global Config |
| Parameter | Description |
|---|---|
| local | Uses the local username database for authentication. |
| none | Uses no authentication. |
| radius | Uses the list of all RADIUS servers for authentication. |
| tacacs | Uses the list of all TACACS+ servers for authentication. |
The following example configures HTTPS authentication.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB(Extreme 220) (Config) # ip https authentication radius local