show port-security static

This command displays the statically locked MAC addresses for port. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to specify the LAG (Link Aggregation Group) interface. lag lag-intf-num can also be used to specify the LAG interface where lag-intf-num is the LAG port number.

Format show port-security static {unit/slot/port | lag lag-intf-num}
Mode Privileged EXEC
Column
Meaning
Statically Configured MAC Address The statically configured MAC address.
VLAN ID The ID of the VLAN that includes the host with the specified MAC address.
Sticky Whether the static MAC address entry is added in sticky mode.

The following example shows CLI display output for the command.

(Extreme 220) (Routing) #show port-security static 1/0/1
 Number of static MAC addresses configured: 2
 Statically configured MAC Address    VLAN ID    Sticky
 ---------------------------------    -------    ------
 00:00:00:00:00:01                    2            Yes
 00:00:00:00:00:02                    2            No