Preface
Using the Command-Line Interface
Stacking Commands
Management Commands
Utility Commands
Switching Commands
Routing Commands
IPv6 Management Commands
Quality of Service Commands
Application Commands
200 Series Log Messages
- Core
- Utilities
- Management
- Switching
- QoS
- Routing/IPv6 Routing
- Stacking
- Technologies
- O/S Support

show snmp source-interface

Use this command in Privileged EXEC mode to display the configured global source-interface (Source IP address) details used for an SNMP (Simple Network Management Protocol) client.

Format	show snmp source-interface
Mode	Privileged EXEC

The following example shows CLI display output for the command.

(Extreme 220) (Routing)# show snmp source-interface
SNMP trap Client Source Interface.............. (not configured)

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback