ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Port-Based Network Access Control Commands > dot1x dynamic-vlan enable > no dot1x dynamic-vlan enable

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no dot1x dynamic-vlan enable

Use this command to prevent the switch from creating VLANs when a RADIUS (Remote Authentication Dial In User Service)-assigned VLAN does not exist in the switch.

Format	no dot1x dynamic-vlan enable
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback