show classofservice packet-drop-count

This command displays the number of dropped counters for each CoS (Class of Service) egress queue on the specified port.

For 220 Series switches, specify the port name in unit/slot/port format.

For 210 Series switches, specify the port name in slot/port format.

The following shows an example of the command and its output:

(Extreme 210) #show classofservice packet-drop-count 0/1

Packets dropped on COS queue 0................. 0
Packets dropped on COS queue 1................. 0
Packets dropped on COS queue 2................. 0
Packets dropped on COS queue 3................. 0
Packets dropped on COS queue 4................. 0
Packets dropped on COS queue 5................. 0
Packets dropped on COS queue 6................. 0
Packets dropped on COS queue 7................. 0
Time Since Counters Last Cleared............... 0 day 0 hr 3 min 22 sec