ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Port-Channel/LAG (802.3ad) Commands > lacp actor admin state longtimeout > no lacp actor admin state longtimeout

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no lacp actor admin state longtimeout

Use this command to set the LACP actor admin state to short timeout.

Format	no lacp actor admin state longtimeout
Mode	Interface Config

Note

Note

This command is applicable only to physical interfaces.

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback