QoS

Click to expand in new window

ACL Log Messages

Component Message Cause
ACL (Access Control List) Total number of ACL rules (x) exceeds max (y) on intf i. The combination of all ACLs applied to an interface has resulted in requiring more rules than the platform supports.
ACL aclLogTask: error logging ACL rule trap for correlator number The system was unable to send an SNMP (Simple Network Management Protocol) trap for this ACL rule which contains a logging attribute.
ACL IP ACL number: Forced truncation of one or more rules during config migration While processing the saved configuration, the system encountered an ACL with more rules than is supported by the current version. This may happen when code is updated to a version supporting fewer rules per ACL than the previous version.
Click to expand in new window

CoS Log Message

Component Message Cause
COS cosCnfgrInitPhase3Process: Unable to apply saved config -- using factory defaults The CoS component was unable to apply the saved configuration and has initialized to the factory default settings.
Click to expand in new window

DiffServ Log Messages

Component Message Cause
DiffServ diffserv.c 165: diffServRestore Failed to reset DiffServ. Recommend resetting device While attempting to clear the running configuration an error was encountered in removing the current settings. This can lead to an inconsistent state in the system. We recommend rebooting the switch.
DiffServ Policy invalid for service intf: policy name, interface x, direction y The DiffServ policy definition is not compatible with the capabilities of the interface specified. Check the platform release notes for information on configuration limitations.