ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Protected Ports Commands > switchport protected (Interface Config) > no switchport protected (Interface Config)

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no switchport protected (Interface Config)

Use this command to configure a port as unprotected. The groupid parameter identifies the set of protected ports to which this interface is assigned.

Format	no switchport protected groupid
Mode	Interface Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback