IPv6 Management Commands
IPv6 Management commands allow a device to be managed via an IPv6 address in a switch or IPv4 routing (that is, independent from the IPv6 Routing package). For Routing/IPv6 builds of 200 Series dual IPv4/IPv6 operation over the service port is enabled. 200 Series has capabilities such as:
- Static assignment of IPv6 addresses and gateways for the service/network ports.
- The ability to ping an IPv6 link-local address over the service/network port.
- Using IPv6
Management commands, you can send SNMP (Simple Network Management Protocol) traps and queries
via the service/network port.
- The user can manage a device via the network port (in addition to a Routing Interface or the Service port).