ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Spanning Tree Protocol Commands > spanning-tree max-hops > no spanning-tree max-hops

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no spanning-tree max-hops

This command sets the Bridge Max Hops parameter for the common and internal spanning tree to the default value.

Format	no spanning-tree max-hops
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback