ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > GARP Commands > set garp timer leave > no set garp timer leave

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no set garp timer leave

This command sets the GVRP leave time on all ports or a single port to the default and only has an effect when GVRP is enabled.

Format	no set garp timer leave
Mode	Interface Config Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback