Use this command to display interface green-mode EEE LPI (low-power idle) history.
| Format | green-mode eee-lpi-history interface unit/slot/port |
| Mode | Privileged EXEC |
| Sampling Interval | Interval at which EEE LPI statistics is collected. |
| Total No. of Samples to Keep | Maximum number of samples to keep |
| Percentage LPI time per stack | Percentage of time spent in LPI mode by all ports in the stack, compared to the total time since the switch was last rebooted. |
| Sample No. | Sample index. |
| Sample Time | Time since last the last reboot. |
| %time spent in LPI mode since last sample | Percentage of time spent in LPI mode on this port when compared to sampling interval. |
| %time spent in LPI mode since last reset | Percentage of total time spent in LPI mode on this port when compared to time since the last reboot. |
The following example shows CLI display output for the command on a system with the EEE feature enabled.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB(Extreme 220) (Routing) #show green-mode eee-lpi-history interface 1/0/1
Sampling Interval (sec)........................ 30
Total No. of Samples to Keep................... 168
Percentage LPI time per stack.................. 29
Percentage of Percentage of
Sample Time Since Time spent in Time spent in
No. The Sample LPI mode since LPI mode since
Was Recorded last sample last reset
------ -------------------- -------------- --------------
10 0d:00:00:13 3 2
9 0d:00:00:44 3 2
8 0d:00:01:15 3 2
7 0d:00:01:46 3 2
6 0d:00:02:18 3 2
5 0d:00:02:49 3 2
4 0d:00:03:20 3 2
3 0d:00:03:51 3 1
2 0d:00:04:22 3 1
1 0d:00:04:53 3 1