poe high-power

Use this command to enable high power mode for all ports in all units (Global Configuration) or for a specific unit (Interface Configuration mode). In high power mode, the switch negotiates the power budget with the powered device (PD). A PoE port can deliver up to 32 W of power in dot3at mode.

Default Disabled
Format poe high-power {dot3at | legacy | pre-dot3at}
Mode
  • Global Configuration
  • Interface Configuration
Parameter Description
dot3at High power device with LLDP (Link Layer Discovery Protocol) support.
legacy Powered device with a high-inrush current.
pre-dot3at Powered device without LLDP support.