ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Spanning Tree Protocol Commands > spanning-tree transmit

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

spanning-tree transmit

This command sets the Bridge Transmit Hold Count parameter.

Default	6
Format	spanning-tree transmit hold-count
Mode	Global Config

Parameter	Description
hold-count	The Bridge Tx hold-count parameter. The value in an integer between 1 and 10.

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback