snmp-server engineID local

This command configures the SNMP (Simple Network Management Protocol) engine ID on the local device.

Default	The engine ID is configured automatically, based on the device MAC address.
Format	snmp-server engineID local {engineid-string\| default}
Mode	Global Config

Parameter	Description
engineid-string	A hexadecimal string identifying the engine ID, used for localizing configuration. Engine ID must be an even length in the range of 6 to 32 hexadecimal characters.
default	Sets the engine ID to the default string, based on the device MAC address.

Caution

Changing the engine ID will invalidate all SNMP configuration that exists on the box.

Published February 2019prev | next