ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Port-Based Network Access Control Commands > dot1x system-auth-control > no dot1x system-auth-control

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no dot1x system-auth-control

This command is used to disable the dot1x authentication support on the switch.

Format	no dot1x system-auth-control
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback