set igmp maxresponse

This command sets the IGMP (Internet Group Management Protocol) Maximum Response time for the system, on a particular interface or VLAN, or on a range of interfaces. The Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an interface because it did not receive a report for a particular group in that interface. This value must be less than the IGMP Query Interval time value. The range is 1 to 25 seconds.

Default 10 seconds
Format set igmp maxresponse [vlan_id] 1-25
  • Global Config
  • Interface Config
  • VLAN Config