Use this command to set the timing parameters for local data transmission on ports enabled for LLDP (Link Layer Discovery Protocol). The interval-seconds determines the number of seconds to wait between transmitting local data LLDPDUs. The range is 1-32768 seconds. The hold-value is the multiplier on the transmit interval that sets the TTL in local data LLDPDUs. The multiplier range is 2-10. The reinit-seconds is the delay before reinitialization, and the range is 1-0 seconds.
Default |
|
Format | lldp timers [interval interval-seconds] [hold hold-value] [reinit reinit-seconds] |
Mode | Global Config |