Display the SPB-PIM Gateway Neighbor Information

Use the following procedure to display the SPB-PIM Gateway interfaces neighbor information.

Procedure

To enter User EXEC mode, log on to the switch.
Display the SPB-PIM Gateway neighbor information:

show ip spb–pim–gw neighbor [vrf WORD<1–16>] [vrfids WORD<0–512>]

Example

Switch:1>show ip spb-pim-gw neighbor

=============================================================================
                          Spb-pim-gw Neighbor - GlobalRouter
=============================================================================
INTERFACE ADDRESS         UPTIME                EXPIRE               
Vlan26    26.1.1.10       0 day(s), 00:11:36    0 day(s), 00:01:28   

Total SPB-PIM-GW Neighbors Displayed = 1/1
-----------------------------------------------------------------------------

Variable definitions

The following table defines parameters for the show ip spb-pim-gw neighbor command.


Variable	Value
vrf`WORD<1-16>`	Displays the SPB-PIM Gateway interface neighbor information for a specific VRF name.
vrfids `WORD<0-512>`	Displays the SPB-PIM Gateway interface neighbor information for a range of VRF IDs. Note: Enter a single VRF ID or multiple VRF IDs separated by ‘,‘ or enter a range of VRF IDs ‘x-y‘.