View RADIUS Server Information

If your system is configured with a RADIUS server you can display the RADIUS server information.

Procedure

To enter User EXEC mode, log on to the switch.
To view the RADIUS server information enter the following command:
show radius-server
Note
If no RADIUS server is configured, the system displays the following message:
no RADIUS server configured

Example

Switch:1#show radius-server
=========================================================================================
                                    Radius Server Entries
=========================================================================================
                                                              SECURE  SECURE SECURE   SECURE   SECURE    ACCT ACCT    
NAME           USEDBY  SECRET PORT PRIO RETRY TIMEOUT ENABLED ENABLED MODE   INSTANCE PROFILE  LOG-LEVEL PORT ENABLED 
------------------------------------------------------------------------------------------------------------------------
192.0.2.14     cli     ****** 1812 10   1     8       true    true    tls    0        radsecp  error     1813 true    
192.0.2.15     cli     ****** 1812 10   1     8       true    false   tls    -1       default  error     1813 true