View Ping Probe History

About this task

View the ping probe history to view the history of ping tests performed by the switch.

Note

Note

Troubleshooting using ping and traceroute is not supported on EDM. For more information, see VOSS Release Notes. As an alternative, use CLI.

Procedure

  1. From the navigation pane, expand Configuration > Serviceability > Diagnostics.
  2. Select Ping/Trace Route.
  3. Select a ping entry.
  4. Select Ping Probe History.

Ping Probe History Field Descriptions

Use the data in the following table to use the Ping Probe History tab.

Name

Description

OwnerIndex

Specifies the owner index

TestName

Indicates the name given to the test.

Index

Specifies the index number.

Response

Indicates the amount of time, measured in milliseconds, between request (probe) and response, or when the request timed out. Response is reported as 0 when it is not possible to transmit a probe.

Status

Indicates the status of the response; the result of a particular probe done by a remote host.

LastRC

Indicates the last implementation-method-specific reply code (RC) received. If ICMP Echo is used, then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0).

Time

Indicates the timestamp for this probe result.