Configure the SPB-PIM Gateway Optional Parameters
About this task
Perform this procedure to configure the optional parameters on existing SPB-PIM Gateway interfaces.
Procedure
- In the navigation pane, expand .
- Select SPB-PIM-GW.
- Select the Interfaces tab.
- In the row for the interfaces, double-click HelloInterval, and then type the hello interval in seconds.
- In the row for the interfaces, double-click JoinPruneInterval, and then type the join prune interval in seconds.
- Select Apply.
Interfaces Field Descriptions
Use the data in the following table to use the Interfaces tab.
|
Name |
Description |
|---|---|
|
IfIndex |
Shows the interface index. |
|
OperState |
Shows the operational state of the interface. |
|
AddressType |
Shows the address type of the interface. |
|
Address |
Shows the address assigned to the interface. |
|
AddressMask |
Shows the address mask associated with the interface address. |
|
HelloInterval |
Configures the PIM HELLO transmission interval. The default is 30 seconds. |
|
JoinPruneInterval |
Configures the PIM JOIN PRUNE transmission interval. The default is 60 seconds. |