Associate a Port and MLT with an I-SID for ELAN
Shortest Path Bridging MAC (SPBM) supports Layer 2 Virtual Service Network (VSN) functionality where Switched UNIs are bridged over the SPBM core infrastructure.
Switched User Network Interface (S-UNI) allows the association of local endpoints to I-SIDs based on local port and VLAN together. With switched UNI, the same VLAN can be used on one port to create an endpoint to one I-SID, and on another port to create an endpoint to another I-SID.
Use the following procedure to associate a port and MLT with an I-SID.
About this task
You must configure Switched UNI.
Procedure
- In the navigation pane, expand .
- Select ISID.
- On the Service tab, select a row with the type configured as elan.
- Select Switched Uni.
- Select Insert.
- Enter the VLAN ID in the Cvid field.
- Select Port or Mlt to update the interface index in the IfIndex field.
- Select Insert.
Switched Uni Field Descriptions
Use the data in the following table to use the Switched Uni tab.
|
Name |
Description |
|---|---|
|
Isid |
Displays the I-SID. |
|
Cvid |
Specifies the customer VLAN identifier. |
|
IfIndex |
Specifies the interface index of the ELAN end point. |
|
Bpdu |
Enables or disables for an untagged end point. The default is disabled. |
|
OriginBitmap |
Specifies the origin information of the service associated with the I-SID ELAN end point. |
|
MacBased |
Shows if the current entry is associated to a MAC-based Switched User Network Interface (S-UNI). |