Configure an ACE to Filter IPv4 Routed Packets

Configure an ACE to filter IPv4 routed packets.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation pane, expand Configuration > Security > Data Path.
  2. Select Advanced Filters (ACE/ACLs).
  3. Select IpRouted tab.
  4. Select Insert.
  5. In the AclId field, type the appropriate ACL ID.
  6. In the AceId field, type the appropriate ACE ID.
  7. RoutedOnly
  8. Select Insert.

IpRouted Field Descriptions

The following table describes values on the IpRouted tab.

Name

Description

AclId

Specifies the ACL ID. Value range of 1 to 2048.

AceId

Specifies the ACE ID. Value range of 1 to 2000.
9037803-01 Rev AA