View Power Supply Parameters

Perform this procedure to view information about the operating status of the power supplies.

Procedure

Use the data in the following table to use the Detail tab.


Name	Description
Type	Describes the type of power used. Note: To know what power types the switch supports, see the hardware installation documentation.
Description	Provides a description of the power supply.
SerialNumber	Specifies the power supply serial number.
HardwareRevision	Specifies the hardware revision number.
PartNumber	Specifies the power supply part number.
PowerSupplyOperStatus	Specifies the status of the power supply as one of the following: unknown empty up down
InputLineVoltage	Displays the input line voltage: low110v—power supply connected to a 110 Volt source high220v—power supply connected to a 220 Volt source ac110vOr220v—power supply connected to a 110 Volt or 220 Volt source
OutputWatts	Displays the output power of this power supply.
VoltageIn	Specifies the input voltage value in millivolts (mV) for the power supply unit.
	Specifies the output voltage value in millivolts (mV) for the power supply unit.
CurrentIn	Specifies the input current value in milliamps (mA) for the power supply unit.
CurrentOut	Specifies the output current value in milliamps (mA) for the power supply unit.
PowerIn	Specifies the input power value in milliwatts (mW) for the power supply unit.
PowerOut	Specifies the output power value in milliwatts (mW) for the power supply unit.