Change the state (active or passive) of PIM on a VLAN interface.
Before you begin
Before you change
the state of PIM on a VLAN interface, you must first disable PIM to
prevent instability in the PIM operations, especially when neighbors
exist or when the interface receives streams.
Procedure
-
In the navigation pane, expand
.
-
Select VLANs.
-
Select the Basic tab.
- Select the VLAN ID
that you want to configure with PIM.
-
Select IP.
-
Select the PIM tab.
- Clear the Enable check
box.
-
Select Apply.
- Select active or passive.
- Reenable PIM on the
VLAN interface.
-
Select Apply.
