View Remote DvR Host Entries

Note

Note

This procedure only applies to the VSP 7400 Series.

About this task

Perform this procedure to view the remote DvR host entries (IPv4 remote ARPs) on either a Controller or a Leaf node. The node displays the host entries learned either locally on its UNI port or dynamically from other nodes in the DvR domain.

Before you begin

Ensure that you enable DvR globally on the node.

Procedure

  1. In the navigation pane, expand Configuration > Fabric.
  2. Select DVR Remote.
  3. Select the Host Entries tab.
  4. Optional: To filter the rows based on the specific criteria, select Filter.

Host Entries Field Descriptions

Use the data in the following table to use the Host Entries tab.

Name

Description

IpAddrType

Specifies the address type of the DvR host entry (IPv4 remote ARP).

IpAddr

Specifies the IPv4 address of the DvR host entry.

Mask

Specifies the subnet mask of the DvR host entry.

L3Isid

Specifies the Layer 3 I-SID of the DvR host entry.

MacAddr

Specifies the MAC address of the DvR host entry.

L2Isid

Specifies the Layer 2 I-SID of the DvR host entry.

VrfId

Specifies the VRF ID associated with the DvR host entry.

Port

Specifies the port of the DvR host entry.

DomainId

Specifies the DvR domain ID of the DvR host entry.

Type

Specifies the host type of the DvR host entry.

NextHopName

Specifies the next hop system name of the DvR host entry.

NextHopMac

Specifies the next hop system MAC address of the DvR host entry.

ClearEntry

Clears the entry if the configured value is true.