Configure an NTP Server for a DHCP Server Subnet
Use this procedure to configure an NTP server address to advertise to clients within a
DHCP Server subnet.
Procedure
- In the navigation pane, expand .
- Select DHCP Server.
- Select the Subnet NTP tab.
- Select Insert.
- In Subnet IP, type the subnet network address.
- In Subnet Mask, type the subnet mask.
- In IP, type the IPv4 address of the NTP server.
- Select Insert.
Subnet NTP Field Descriptions
Use the data in the following table to use the Subnet NTP tab.
| Name | Description |
|---|---|
|
Subnet IP |
Specifies the network address of the DHCP subnet. |
|
Subnet Mask |
Specifies the subnet mask for the DHCP subnet. |
|
IP |
Specifies the IPv4 address for the NTP server that you want to assign to this subnet. You can assign up to eight NTP servers to a subnet. |