Configure VRRPv3 Checksum
About this task
Perform this procedure to configure VRRPv3 checksum on either a brouter port or a VLAN.
Procedure
- In the navigation pane, expand .
- Select VRRP.
- Select the V3 Checksum tab.
- Select Insert.
- In Interface, select Port or Vlan.
- Select the ports or VLANs from the list, and then select OK.
- Select a type of checksum computation.
- Select a VRRP version.
- Select Insert.
V3 Checksum Field Descriptions
Use the data in the following table to use the V3 Checksum tab.
|
Name |
Description |
|---|---|
|
Interface |
Shows VRRPv3 information about a specified interface. |
|
rcIpConfIfIndex |
Shows the index value that uniquely identifies the interface to which this entry applies. |
|
ChkSumComputation |
Specifies the type of checksum computation, with Pseudo Header or without Pseudo Header. |
|
VrrpVersion |
Specifies the VRRP version as unspecified, v2, or v3. |