Configuring EAPS Support for Multicast Traffic

The ExtremeXOS software provides several commands for configuring how EAPS supports multicast traffic after an EAPS topology change. For more information, see the descriptions for the following commands:

configure eaps multicast add-ring-ports [on | off]

configure eaps multicast send-query [on | off]

configure eaps multicast temporary-flooding [on | off]

These commands apply for both IGMP and MLD.

Note

Note

Using the configure eaps multicast send-query command applies to both IGMP and MLD. This also replaces the configure eaps multicast send-igmp-query command.