Using the Port Monitoring Display Keys

Port Monitoring Display Keys with Auto-Refresh Enabled describes the keys used to control the displays that appear if you use any of the show ports commands without specifying the no-refresh parameter (this is the default behavior).

Table 1. Port Monitoring Display Keys with Auto-Refresh Enabled
Key(s)	Description
[U]	Displays the previous page of ports.
[D]	Displays the next page of ports.
[Esc]	Exits from the screen.
[0]	Clears all counters.
[Space]	Cycles through the following screens: Packets per second Bytes per second Percentage of bandwidth Note: Available only using the show ports utilization command.

Port Monitoring Display Keys with Auto-Refresh Disabled describes the keys used to control the displays that appear if you use any of the show ports commands and specify the no-refresh parameter.

Table 2. Port Monitoring Display Keys with Auto-Refresh Disabled
Key	Description
[Q]	Exits from the screen.
[Space]	Displays the next page of ports.