Displaying Port PoE Statistics

To display the PoE statistics for each port, run the show inline-power stats ports {port_list} command. The command provides the following information:

  • State—Displays the port power state:
    • Disabled

    • Searching

    • Delivering

    • Faulted

    • Disconnected

    • Other

    • Denied

  • PD‘s power class—Displays the class type of the connected PD:
    • “-----”: disabled or searching
    • “class0”: class 0 device
    • “class1”: class 1 device
    • “class2”: class 2 device
    • “class3”: class 3 device
    • “class4”: class 4 device
    • “class5”: class 5 device
    • “class6”: class 6 device
    • “class7”: class 7 device
    • “class8”: class 8 device
  • Absent—Displays the number of times the port was disconnected.

  • InvSig—Displays the number of times the port had an invalid signature.

  • Denied—Displays the number of times the port was denied.

  • Over-current—Displays the number of times the port entered an overcurrent state.

  • Short—Displays the number of times the port entered undercurrent state.