Verifying a Universal Port Profile

To verify a Universal Port profile configuration, trigger the profile and verify that it works properly. Trigger the profile based on the trigger type as follows:
  • Device triggers–plug in the device
  • Authentication triggers–authenticate a device or user
  • Timer triggers–temporarily configure the timer for an approaching time
  • EMS event triggers–reproduce the event to which the trigger responds

You can use the commands described earlier in this section to view information about the profile and how it behaves.

Because Universal Port works with multiple switch features, you might want to enter commands to examine the configuration of those features.

The following commands are an example of some of the commands that can provide additional information about profile operation.

Run:

show lldp
show lldp neighbors
show log
show netlogin