VR Configuration Support

Starting with ExtremeXOS 22.2, NTP can be configured over multiple VRs.

To enable NTP on a VR, use the following command:

enable ntp vr vr_name

Note

Note

If VR is not specified, command is executed in current VR context and enables NTP for that VR alone.

To configure NTP over VLANs, use the following command:

enable ntp vlan vlan-name [broadcast-server | key keyid]

To configure NTP in all VLANs for a VR, use the following command:

enable ntp vr vr_name

The VR configuration can be seen in show ntp {{vr}vr_name} command output.