Disabling EAPS Loop Protection Warning Messages

The switch displays by default loop protection messages when configuring the following EAPS parameters:
  • Adding EAPS primary or secondary ring ports to a VLAN
  • Deleting a protected VLAN
  • Disabling the global EAPS setting on the switch
  • Disabling an EAPS domain
  • Configuring an EAPS domain as a transit node
  • Unconfiguring EAPS primary or secondary ring ports from an EAPS domain

We recommend keeping the loop protection warning messages enabled. If you have considerable knowledge and experience with EAPS, you might find the EAPS loop protection warning messages unnecessary. For example, if you use a script to configure your EAPS settings, disabling the warning messages allows you to configure EAPS without replying to each interactive yes/no question.