Creating and Configuring the EAPS Control VLAN

  1. Create the EAPS control VLAN and configure its 802.1q tag and ring ports.
  2. Configure the control VLAN as part of the EAPS domain. The control VLAN only contains the EAPS primary and secondary ports configured earlier. The following commands accomplish these tasks:
    * Edge-Switch#1:5 # create vlan control-1
    * Edge-Switch#1:6 # configure vlan control-1 tag 4000
    * Edge-Switch#1:8 # configure vlan control-1 add port 49,50 tagged
    * Edge-Switch#1:9 # configure eaps e1-domain add control vlan control-1