BGP Routes Before Policy Application

The following example shows the routes in the BGP routing table at Router A after completing the configuration described in the previous two sections:

* Switch.122 # show bgp routes address-family ipv6-unicast all
Routes:
Destination                                 LPref Weight MED
Peer                                     Next-Hop
AS-Path
-------------------------------------------------------------------------
*>i  2001:db8:4001::/48                          100   1      0
2001:db8:2000::2                         2001:db8:2000::2
1100 5623
*>i  2001:db8:4002::/48                          100   1      0
2001:db8:2000::2                         2001:db8:2000::2
1100 5623
*>i  2001:db8:4003::/48                          100   1      0
2001:db8:2000::2                         2001:db8:2000::2
1100 5623
*>i  2001:db8:5030::/48                          100   1      0
2001:db8:2000::2                         2001:db8:2000::2
1100 4977
*>i  2001:db8:5031::/48                          100   1      0
2001:db8:2000::2                         2001:db8:2000::2
1100 4977
*>i  2001:db8:a004::/48                          100   1      0
2001:db8:2000::2                         2001:db8:2000::2
1100
Flags: (*) Preferred BGP route, (>) Active, (d) Suppressed, (h) History
(s) Stale, (m) Multipath, (u) Unfeasible
Origin: (?) Incomplete, (e) EGP, (i) IGP
BGP Route Statistics
Total Rxed Routes : 6
Feasible Routes   : 6
Active Routes     : 6
Rejected Routes   : 0
Unfeasible Routes : 0
Route Statistics on Session Type
Routes from Int Peer: 0
Routes from Ext Peer: 6