EXTREME MLAG MIB

Note
EXTREME MLAG MIB objects such as extremeMlagLocalAddrType, extremeMlagLocalIP, extremeMlagAlternateLocalAddrType, extremeMlagAlternateLocalIP are defined with a maximum access of read-create and are populated automatically based on MLAG peer info.Table/Group | Supported Variables | Comments |
---|---|---|
extremeMlagPeerTable |
This table contains MLAG peer entries. This table contains a MLAG peer switch association structure, associates an MLAG peer structure with an MLAG peer switch IP address. Displays User configured items, MLAG peer switch state, MLAG port count and health-check statistics. |
|
extremeMlagPeerName |
Read-create The name of the MLAG Peer switch. MLAG Peer names must be alpha-numeric and must start with an alpha character. |
|
extremeMlagPeerVlan |
Read-only The name of the VLAN through which the MLAG Peer can be reached. |
|
extremeMlagPeerVR |
Read-create The name of the VR with which the MLAG peer VLAN is associated with. |
|
extremeMlagLocalAddrType |
Read-create The IP address type of the extremeMlagLocalIP object. |
|
extremeMlagLocalIP |
Read-create Local Switch IPAddress of ISC connection. |
|
extremeMlagPeerAddrType |
Read-create The IP address type of the extremeMlagPeerIP object. |
|
extremeMlagPeerIP |
Read-create MLAG peer IP address for the ISC. The specified IP address must be contained within an existing direct route. |
|
extremeMlagPeerPortCount |
Read-only Number of MLAG Ports associated with this MLAG peer |
|
extremeMlagPeerCheckPointStatus |
Read-only Checkpointing Status of this MLAG peer |
|
extremeMlagPeerRxHellos |
Read-only Number of Hellos received from the peer |
|
extremeMlagPeerRxCheckpointMsgs |
Read-only Number of Checkpoint Messages received from the peer |
|
extremeMlagPeerHelloErrors |
Read-only Number of Hello Error Messages |
|
extremeMlagPeerHelloTimeouts |
Read-only Number of Hello Timeout Messages |
|
extremeMlagPeerUptime |
Read-only Specifies the time that the Connectivity with the peer is up |
|
extremeMlagPeerLocalTxInterval |
Read-create Length of the time in milli seconds between health check hello packets transmitted by this switch. |
|
extremeMlagPeerRemoteTxInterval |
Read-only Transmitting Hello Interval of Peer Switch in milli seconds |
|
extremeMlagPeerTxHellos |
Read-only Number of Health Check Hellos transmitted |
|
extremeMlagPeerTxCheckpoints |
Read-only Number of transmitted Checkpoint messages |
|
extremeMlagPeerCheckpointErrors |
Read-only Number of Checkpoint Errors |
|
extremeMlagPeerConnnectErrors |
Read-only Number of Peer Connect errors |
|
extremeMlagPeerRowStatus |
Read-create The status of this entry |
|
extremeMlagPeerCfgLacpMac |
Read-create This MAC address specifies the MLAG LACP MAC configured on this switch. If configured, this MAC is used as the System Identifier in the LACPDUs sent over the MLAG Ports. If not configured, the MAC address of MLAG peer having highest IP address for ISC control VLAN is chosen as the System Identifier in the LACPDUs sent over the MLAG ports. |
|
extremeMlagPeerOperLacpMac |
Read-only This MAC address specifies the MLAG LACP MAC that is being used as the System Identifier in the LACPDUs sent over the MLAG Ports. This may be different from extremeMlagPeerCfgLacpMac if same extremeMlagPeerCfgLacpMac is not configured on both the MLAG peers. |
|
extremeMlagPeerAlternateVlan |
Read-only The name of the alternate VLAN through which the MLAG Peer can be reached when the primary path is unreachable. |
|
extremeMlagPeerAlternateVR |
Read-create The name of the alternate VR with which the MLAG peer alternate VLAN is associated with. |
|
extremeMlagAlternateLocalAddrType |
Read-create The IP address type of the extremeMlagAlternateLocalIP object. |
|
extremeMlagAlternateLocalIP |
Read-create Local Switch IPAddress for alternate health check connection to MLAG peer. |
|
extremeMlagAlternatePeerAddrType |
Read-create The IP address type of the extremeMlagAlternatePeerIP object. |
|
extremeMlagAlternatePeerIP |
Read-create MLAG peer IP address for alternate health check connection. |
|
extremeMlagPeerAlternateRxHellos |
Read-only Number of Hellos received from the peer on the alternate health check connection |
|
extremeMlagPeerAlternateHelloErrors |
Read-only Number of Hello Error Messages on the alternate health check connection |
|
extremeMlagPeerAlternateHelloTimeouts |
Read-only Number of Hello Timeout Messages on the alternate health check connection |
|
extremeMlagPeerAlternateTxHellos |
Read-only Number of Health Check Hellos transmitted on the alternate health check connection |
|
extremeMlagPeerCheckPointAuthType |
Read-create Enumerates the possible types of authentication types for the MLAG checkpoint connection to the MLAG peer. none(1) Do not use authentication. md5(2) Use MD5 authentication. |
|
extremeMlagPeerCheckpointAuthKey |
Read-create The authentication key to be used for checkpoint conntection to the peer. Recommended to be of size 12-24 per RFC 3562. This object will return a blank string of minimum length when queried. |
|
extremeMlagPortTable |