Displaying Information for a Network or Subscriber VLAN

To display information about a network or subscriber VLAN, use the command:

show vlan {virtual-router vr-name}

The following flags provide PVLAN specific information:

s flat
Identifies a network VLAN port that the system added to a subscriber VLAN. All subscriber VLANs contain network VLAN ports that are marked with the s flag.
L flag
Identifies a subscriber VLAN port that is configured as a loopback port.
t flag
Identifies a tagged network VLAN port on which tag translation is enabled. The t flag only appears in the show vlan display for network VLANs.
e flag
Identifies a network VLAN port that is configured as an endpoint. The e flag only appears in the show vlan display for network VLANs.