Configuring Non-Isolated Subscriber VLAN Ports
The process for configuring non-isolated VLAN ports requires two tasks:
- Add a VLAN to the PVLAN as a non-isolated subscriber VLAN.
- Assign ports to the non-isolated subscriber VLAN.
These tasks can be completed in any order, but they must both be completed before a port
can participate in a PVLAN. When configuration is complete, all egress traffic from the port
is translated to the VLAN tag for that non-isolated VLAN (unless the port is configured as
untagged).
Note
To configure VLAN translation for network VLAN ports, see Configuring Network VLAN Ports for VLAN Translation.