Creating and Configuring the Backbone EAPS Domain

  1. Create the backbone EAPS domains and configure the EAPS mode.
  2. Define the primary and secondary ports for each domain.
    Configure on both core and aggregation switches.

    Core-Switch 1 EAPS configuration:

    * CORE-SWITCH#1.1 # create eaps e5-domain
    * CORE-SWITCH#1.2 # configure eaps e5-domain mode transit
    * CORE-SWITCH#1.3 # configure eaps e5-domain primary port 2:1
    * CORE-SWITCH#1.4 # configure eaps e5-domain secondary port 2:4
    Core-Switch 2 EAPS configuration:
    * CORE-SWITCH#2.1 # create eaps e5-domain
    * CORE-SWITCH#2.2 # configure eaps e5-domain mode master
    * CORE-SWITCH#2.3 # configure eaps e5-domain primary port 2:1
    * CORE-SWITCH#2.4 # configure eaps e5-domain secondary port 2:4
    Agg-Switch 1 EAPS configuration:
    * AGG-SWITCH#1.1 # create eaps e5-domain
    * AGG-SWITCH#1.2 # configure eaps e5-domain mode transit
    * AGG-SWITCH#1.3 # configure eaps e5-domain primary port 2:1
    * AGG-SWITCH#1.4 # configure eaps e5-domain secondary port 2:4
    Agg-Switch 2 EAPS configuration:
    * AGG-SWITCH#2.1 # create eaps e5-domain
    * AGG-SWITCH#2.2 # configure eaps e5-domain mode transit
    * AGG-SWITCH#2.3 # configure eaps e5-domain primary port 2:1
    * AGG-SWITCH#2.4 # configure eaps e5-domain secondary port 2:4