Configuring H-VPLS Core Nodes

To configure a VPLS core node as an H-VPLS core node, use the following command:
configure l2vpn [vpls vpls_name | vpws vpws_name] add peer ipaddress {{core {full-mesh | primary | secondary} | spoke}

Use the spoke command option to specify that the peer is an H-VPLS spoke node. When the H-VPLS spoke and core peers are configured, VPLS communications can be established between them.

Note
To enable communications from the H-VPLS spoke across the VPLS network, the H-VPLS core node must also be configured to peer with the other VPLS nodes.
To delete an H-VPLS core node, use the following command:
configure l2vpn [vpls vpls_name | vpws vpws_name] delete peer [ipaddress | all]