localhost:7 # configure vlan marketing add ports 1:1,1:2 Error: Protocol conflict when adding untagged port 1:1. Either add this port as tagged or assign another protocol to this VLAN.
You already have a VLAN using untagged traffic on a port. Only one VLAN using untagged traffic can be configured on a single physical port.
You verify the VLAN configuration using the following command:
The solution for this error using this example is to remove ports 1 and 2 from the VLAN currently using untagged traffic on those ports.
localhost:23 # configure vlan default delete ports 1:1,1:2
localhost:26 # configure vlan marketing add ports 1:1,1:2
There are restrictions on VLAN names. They cannot contain whitespaces and cannot start with a numeric value.
The system can have an IP address for each configured VLAN. You must configure an IP address associated with a VLAN if you intend to manage (Telnet, SNMP, ping) through that VLAN or route IP traffic.
You can also configure multiple default routes for the system. The system first tries the default route with the lowest cost metric.