Configure the NMS Client Software

The switch uses NMS client software to connect to an NMS server for VM authentication. Use the following commands to configure the NMS client software in the switch:
configure vm-tracking nms [primary | secondary] server [ipaddress | hostname] {udp_port} client-ip client_ip shared-secret {encrypted} secret {vr vr_name}

configure vm-tracking nms timeout seconds

configure vm-tracking timers reauth-period reauth_period
To remove the NMs client configuration for one or both NMS servers, use the following command:
unconfigure vm-tracking nms {server [primary | secondary]}
To display the NMS client configuration, use the following command:
show vm-tracking nms server {primary | secondary}